欧美韩日逼-欧美韩日日-欧美韩日无-欧美韩偷拍-欧美韩一区-欧美好看的-欧美黑白配-欧美黑人xxx

2K SOLVENTBORNE EPOXY MIO MIDCOAT

PRODUCT DESCRIPTION

This is a two-component polyamine-cured coating. It is a micaceous iron oxide (MIO) pigmented, fast-drying, high-solids, high-build epoxy product. It offers good leveling and improved film appearance. Designed as a midcoat in systems for new construction in atmospheric environments. Suitable in approved coating systems.

FEATURES & APPLICATION

• Excellent water and salt resistance; 

• Dry film is tough, strong, and wear-resistant; 

• Easy to reach high thickness and good application properties; 

• Excellent anti-corrosion properties; 

• Long over-coating interval, thus a wider working window; 

• Less burn during gas-cutting and welding; 

• Good compatibility with various topcoats.

It's mainly used on steel surface sprayed with zinc-rich primer, has excellent adhesion with primer and top coat.It can be used for steel structures and steel supports of various power equipment in substations, iron towers of transmission lines; easily rusted cast iron or steel components such as buildings, bridges, ships, etc.; steel structure of power plant cooling towers, desulfurization flues, the main powerhouse, coal transport trestle, dry coal awning, etc.

PRODUCT PICTURES

APPLICATION AREAS

Substations	Substations	Transmission line	transmission line

RECOMMENDATION

Recommended viscosity: 

• Airless spray: 45″—55″ 

• Air spray: 20±2″ 

• Brush: 35″—45″

Surface preparation: 

• The substrate temperature must be 3°C above the dew point; 

• Rinse away salt and other water-soluble contaminants with clean water; 

• Remove grease according to SSPC-SP1 solvent cleaning standards; 

• Sandblasting to remove rust, oxide, and damaged shop primer to ISO Sa2.5 (SSPC-SP10); 

• After sandblasting and rust removal, the primer must be sprayed within 4 hours; 

• Suitable for pre-treated bare steel; 

• Blow away dust and other dirt with high-pressure air; 

• Make sure the surface is clean and dry before application.

Safety Precautions: 

The following measures shall be guaranteed during any paint applications: 

• Avoid skin and eye contact; 

• In case of skin or eye contact, flush with a large amount of water and immediately get medical attention; 

• Assure good ventilation; 

• Observe all health and safety regulations on-site.

COMBINED SOLUTIONS FOR REFERENCE

1.Cost-effective solution for heavily polluted environment

Epoxy zinc rich primer + Epoxy MIO micaceous iron oxide intermediate coat + Polyurethane topcoat

2.Cost-effective solution for moderately polluted and heavily polluted environments

Epoxy zinc rich primer + Epoxy MIO micaceous iron oxide intermediate coat + Fluorocarbon topcoat

TECHNICAL DATA SHEET