2K SOLVENTBORNE FLUOROPOLYMER TOPCOAT - MULTICOLOR
PRODUCT DESCRIPTION & INTENDED USES
This is a two-component chemically curing fluoro-polymer coating. It has a semi-gloss finish with excellent gloss retention. To be used as a topcoat in atmospheric environments.
FEATURES & APPLICATION
Excellent anti-corrosion performance, excellent weather resistance;
Excellent oil and water resistance;
Excellent impact resistance, wear resistance, good adhesion;
Good workability in application.
Widely used in
Steel structures, steel supports, and iron towers of transmission lines of various power equipment in substations;
Rust-prone cast iron or steel components such as buildings, bridges, ships, etc.;
Power plant cooling tower, desulfurization flue, main powerhouse, coal transport trestle, dry coal awning and other steel structures.
PRODUCT PICTURE
 |  |
| Front | Back |
APPLICATION AREAS
 |  |  |  |
| Substations | Substations | Transmission line | Transmission line |
RECOMMENDATION
Recommended viscosity: Airless spray: 45″—55″ Air spray: 20±2″ Brush: 35″—45″
Surface preparation: The substrate temperature must be above -10°C; Compatible with various primers and midcoats.
Safety Precautions: The following measures shall be guaranteed during any paint applications: 1.Avoid skin and eye contact; 2.In case of skin or eye contact, flush with a large amount of water and immediately get medical attention; 3.Assure good ventilation; 4.Observe all health and safety regulations on-site.
TECHNICAL DATA SHEET
No. | Items | Technical Data | ||||
1 | Dry film thickness | Dry film | ||||
30 | ||||||
2 | Color | Color are available upon request | ||||
3 | Solids by weight % | 60±2 | ||||
4 | Theoretical spreading rate m2/kg (25μm) | 0.09 | ||||
5 | Specific gravity | 1.15 | ||||
| 6 | Curing time hrs | / | 0℃ | 10℃ | 20℃ | 30℃ |
Surface dry | 1hrs | 30min | 15min | 10min | ||
| Walk-on-dry | 24hrs | 10hrs | 12hrs | 8hrs | ||
| Dried for service | 7d | 5d | 3d | 2d | ||
| Pot life | 24hrs | 10hrs | 8hrs | 7hrs | ||
| Baking (60℃) | 2hrs | |||||
| 7 | Dry to over-coat | / | 0℃ | 10℃ | 20℃ | 30℃ |
| Min. | 24hrs | 14hrs | 10hrs | 8hrs | ||
| Max. | - | - | - | - | ||
| 8 | Induction time (min) | 15min | ||||
| 9 | Mix ratio | 2K,A/B=10/1 by weight | ||||
| 10 | Shelf life | 24 months | ||||
| 11 | Package | A:20 Kg; B: 2Kg metal bucket both | ||||
| 12 | VOC (g/L) | 245 | ||||
| 13 | Thinner | 2-5%,specific thinner | ||||
